GT3 / GT4 & endurance

Homologated cars run long stints on kerbs, with pit stops measured in seconds. The work is exact-spec spares, quick-release panels and repairs between rounds.
| Aspect | Detail |
|---|---|
| Dominant failure modes | Splitter and diffuser kerb strikes, contact damage to bumpers and doors, heat soak behind radiators and near exhausts |
| Typical stack | Autoclave T700 twill skins, Nomex or Rohacell core on aero; carbon-Kevlar on lower edges |
| What matters | Repeatability to homologation, fast pit replacement, documented conformity |
| Season support | Spares sets from existing molds, between-round NDT and repair |
Time attack & hillclimb

Open aero rules reward downforce per kilogram. Parts are big, highly loaded and often one-offs from new CFD.
| Aspect | Detail |
|---|---|
| Dominant failure modes | Wing and splitter deflection at speed, aero-elastic flutter, mount and swan-neck failures, endplate cracking |
| Typical stack | Autoclave T700/T800 with UD reinforcement, 10–20 mm Nomex 48 or Rohacell 71 cores, titanium hardpoints |
| What matters | Stiffness at peak load, low mass high on the car, fast iteration |
| Season support | Rapid tooling for aero updates, race-urgent expedite before events |
Open-wheel, formula & FSAE

Single-seaters combine free or semi-free aero with strict safety structures. Student teams need laminate test panels and structural equivalency data as much as parts.
| Aspect | Detail |
|---|---|
| Dominant failure modes | Front wing and nose impacts, endplate damage, stiffness loss in thin wing elements |
| Typical stack | Autoclave UD and twill with honeycomb; aramid in impact zones; high-Tg resin on sidepods and ducts |
| What matters | Stiffness-to-weight, crash compliance, interchangeable spares |
| Season support | Nose and wing spares, FSAE test panels, DFM consultation on monocoques |
Rally & off-road (Dakar / Baja)

Rally and off-road parts are judged by what is left after a stage: stones, ruts, landings and dust, far from a workshop.
| Aspect | Detail |
|---|---|
| Dominant failure modes | Stone-chip erosion, underbody impacts, guard and panel cracking, mount fatigue from vibration |
| Typical stack | Carbon-Kevlar hybrid skins, PMI foam cores, sacrificial outer plies, extra build-up at mounts |
| What matters | Toughness over minimum mass, field-repairable design |
| Season support | Spares packages per event, repair kits and repair procedures |
Tell us your series and the parts you need for the season.
Submit RFQRules by series: motorsport composite regulations. Part detail: aero & bodywork. Budget: tooling estimator and laminate calculator.

