Motorsport composite engineering · North America & UK / Europerfq@racecomposites.com

Estimator 02

Carbon sandwich laminate weight & stiffness calculator

Pick the face-sheet prepreg, plies per skin, core and panel geometry. The calculator returns panel mass, flexural rigidity and predicted deflection under a distributed aero load, split into bending and core shear.

Laminate & panel inputs

2 plies
Symmetric: top and bottom skins get the same plies.
10 mm
Film adhesive per bond line
600 mm
150 kgf

Weight against metal and wood

PanelThicknessMassCarbon saves
Equal bending stiffness per unit width: aluminum E 68.9 GPa, ρ 2,700 kg/m³; plywood E 9.5 GPa, ρ 680 kg/m³. Core shear is not included in the equivalence.

Stack build-up

LayerSpecificationkg/m²$/m²
Raw material only; the panel figure in the readout adds 30% kitting and nesting scrap. Labor, tooling and cure are in the tooling estimator.

Model limits. Isotropic skins with the listed in-plane modulus, simply supported beam under uniform load, linear elastic, no local buckling, core crush or insert pull-out checks. UD modulus is the fiber-axis value: a real ply book with ±45° plies is softer. Use it to compare stacks and size early; final laminates are checked by the engineer reviewing your RFQ. Formulas on the methodology page; material data in the prepreg & core guide; where these panels go in the aero & bodywork guide; tooling cost in the tooling estimator.

Submit an engineering RFQ

Send what you have. We return a DFM review and a production plan.

  • CAD or sample STEP / IGES, a 3D scan, or the physical part to reverse-engineer
  • Spec intent process, fiber grade, core and resin Tg (or let us recommend)
  • Quantity one-off, spares set or season batch
  • Race deadline the event or test date the part must make
Submit engineering RFQ

Or email rfq@racecomposites.com. DFM and capacity check within 1–2 business days.