How we work
Most race teams and builders do not need to own an autoclave; they need the right one, at the right time, with someone who speaks composites checking the work. Race Composites sits between the engineer with a part to make and the facilities that make it.
Scope and budget in the open
Our cost estimator and laminate calculator publish the same math we use internally, with every formula on the methodology page.
Engineering review
Each RFQ gets a DFM review: split lines, draft, ply book, core, inserts, resin Tg, tolerance and the rule set you race under.
Facility match
We place the job with a facility whose autoclave size, CNC envelope, inspection kit and calendar fit the part and your race date.
Accountable delivery
One point of contact through tooling, first article, inspection and batch, with dimensional and NDT reports where specified.
Network quality standards
Facilities in our network are selected for the process they run. Depending on the job, we specify and route to shops working to ISO 9001, AS9100 Rev D and Nadcap Composites, with FARO or CMM metrology and ultrasonic NDT. Where your program requires it, the facility's current certificate and inspection reports come with the quote and the parts.
| What we check | Why |
|---|---|
| Autoclave size, pressure rating and cure logging | Large aero shells and repeatable cures |
| 5-axis CNC envelope and tooling board capability | Pattern and tool accuracy |
| Cleanroom layup, freezer and out-life control | Prepreg quality |
| Metrology (FARO arm, CMM) and NDT (UT, PAUT, C-scan) | Verified parts and repairs |
| Motorsport turnaround record | Making race dates |
Regional coverage
North America
US and Canadian race programs: IMSA, NASCAR, SCCA, NASA, Gridlife and time attack, Formula SAE, Baja and off-road.
UK & Europe
GT3/GT4, endurance, hillclimb, rally and historic racing, with access to UK Motorsport Valley composite capacity.
Contact
RFQs and CAD files: rfq@racecomposites.com
Technical questions and partnerships: engineering@racecomposites.com
Composite facilities interested in joining the network are welcome to write to the engineering address with their process capability and equipment list.

